One of the leading threaded Bars Manufacturers in India is BeeDee Cycle. They are based in Ludhiana, Punjab, ISO 9001:2015 certified manufacturers and exporters (India).
This article will talk about threaded bars and other related topics.
What exactly is a threaded bar?
A threaded bar is a fastener commonly used to secure structures or other objects to a wall or ceiling. It is also used when even the most extended bolt or screw is insufficient for the job.
It’s threaded in a helical pattern, similar to a long-threaded bolt or screw: The threading causes rotational movements during installation. Pressure resistance is created by combining rotational and linear motions. You can attach it with nuts or bolts.
The threaded bar is also known by several other names that you should become acquainted with:
Bolt vs. threaded rod
What’s the difference between a threaded rod and a bolt? A rod has threads on both ends, whereas a bolt has a head and is only threaded on one end. Another distinction is the size. Rods are typically long, whereas bolts are only a few inches long. Threads can be right-handed, left-handed, or both. However, a one-inch left-hand threaded rod can be made simply by cutting a long-threaded rod down. The term “left-hand” refers to the rotation’s direction.
What is the purpose of threaded rods?
Threaded rods are used to connect two materials by pinning or fastening them together. Their purpose is to withstand the high pressure and tension levels, though this depends on the threaded rod’s material. Heavy-duty applications call for threaded metal rods made of titanium, zinc-plated steel, or stainless steel. In construction, for example, a stainless-steel threaded rod or a threaded steel rod is used to join wood and metal and to stabilize structures. The malleability and ductility of copper threaded rods are unrivalled.
It is a popular choice as a heat conductor, in electrical applications, and as a building material because of copper’s high electrical and thermal conductivity.Steel or stainless steel threaded rods are commonly used in plumbing and contracting. They’re commonly used in HVAC installation, for example. They enable the rapid installation of ductwork, heaters, air handlers, and other equipment by levelling or sloping it. They are also commonly used to hang suspended ceilings and are ideal for machine alignment in manufacturing and medicine. Hollow threaded brass rods, which are commonly used to feed wires in lamp holders, are also available.
Threaded rod types
Threaded rod comes in several varieties, including:
Fully threaded rod
The thread extends the length of the rod. These are the rods that hold structures to walls and ceilings.
Double-sided threaded rod
This is a threaded rod with threaded ends. The rod is typically inserted into an unthreaded hole, and the threaded ends are secured with nuts. These are frequently found in doors and assembly housings.
Internally Threaded rod
It is intended to be used in conjunction with a threaded component. This not only guarantees a secure joint but also makes it easier to disassemble if necessary in the future.
Like double-end threaded rods, one end is more prolonged and requires a nut. The tap-end is shorter and has a chamfered point that should be lubricated before screwing into a tapped hole.
Hollow-inside threaded rod
In the lighting industry, this is the most commonly used rod. The rod is hollow so that cables and wires can pass through it.
How to Suspend a Threaded Rod from a Ceiling
Thread the rod through the attachment points on the ceiling. You’ll need brackets to go beneath the installed piece, which will be held in place by nuts threaded onto the vertical rod. These two elements will aid in the process:
Threaded rod hangers
Rod hangers are ceiling attachments for threaded rods, though some designs can also be used on walls. They have a self-tapping concrete screw tip on one end and a threaded rod socket. These threaded rod fixings, unlike wedge anchors, can be drilled straight in, repositioned, and installed closer to edges and in cracked concrete. They’re also a less-drilling alternative to wedge or drop-in anchors.
Threaded rod connectors
Threaded rod installation may entail connecting two rods. These are threaded internally, like a nut, and are also known as threaded rod end fittings, coupling nuts, and threaded rod end connectors.
How to cut threaded rods?
A threaded rod must be cut to length with care, as it may damage the threads, primarily if a hacksaw is used. A threaded rod can be cut with bolt cutters or any tool, but it’s best done with a rod cutter because it’s designed for the job. If that’s not an investment you’re willing to make, then follow these steps:
To cut all-thread rods, start by making sure you have everything you need:
To hold the rod, use a bench vice or a table clamp.
two nuts are required
Metal cut-off wheel with an angle grinder
Safety goggles for eyes
A sharpie pen
Threaded rod cutting through the length:
Step 1: Thread two nuts onto the rod a few inches past the point where you intend to cut.
Step 2: Tighten the nuts against each other.
Step 3: Mark the location where you want to cut.
Step 4: Cut against the shoulder to get a clean, right-angled cut.
Step 5: Round off the edges with the angle grinder – you can also use a file for this.
Step 6: Loosen and remove the nuts to clean and realign the threads.
If you are looking for threaded bars manufacturers in India, contact BeeDeeCycle today!