Leading bolt & U-bolt manufacturers in Ludhiana
Bolts are mechanical fasteners with external threads used with a nut to join parts together by tightening torque. These fasteners are designed to be inserted through pre-drilled holes in the material being joined.
Unlike screws that are also externally threaded fasteners, nuts and bolts work together, which means that bolts must have a nut threaded onto them as well as a drilled hole into which the bolt can be inserted.
The terms “bolting” and “types of bolting” are rarely used in the context of fasteners, being more associated with fabric bolting and bolting machines used in the fabric industry.
Bolts come in various shapes and sizes, each with unique properties that can be used in multiple applications.
Common types of bolts:
Double End Bolts
Machine Bolts and Machine Screws
Round Head Bolts
Socket Head Bolts
Square Head Bolts
Some standard fasteners are summarized below with their essential characteristics and applications.
It is used to secure a structural member or component to a concrete slab or poured foundation. Anchor bolts can be pre-installed while the concrete structure is cast, as with the plate used on a house’s poured foundation. Alternatively, anchors can be attached after the concrete has cured by drilling a channel into which the anchor bolt can be inserted.
Double End Bolts
Double-end bolts, also known as stud bolts, have a threaded portion on each end of the bolt rather than a traditional head. One end is threaded to fit into a suitable hole that has been tapped with a mated thread, while the other protrudes and is threaded to hold a nut. The appearance is comparable to that of a threaded rod, but it is not usually threaded through the stud and may be threaded differently on each end.
Flange bolts are commonly used in plumbing and automotive applications. Flange bolts are traditionally made of steel or stainless steel and come in fine and coarse threads and various grades. The flange can be smooth or serrated, with the latter aiding the fastener’s grip on the mating surface.
Hex bolts, also known as hexagon head bolts or hexagonal head bolts, are popular in standard dimensional inches and metric sizes. As the name implies, these bolts have a hexagonal head that can be tightened with a wrench or socket. A hex bolt can be threaded all the way through or have an unthreaded shoulder. When hex bolts have a washer face underneath the head and a chamfered end, they are sometimes referred to as hex cap screws. Hex bolts lack these characteristics.
Round Head Bolts Roundhead bolts, which resemble carriage bolts in appearance but lack the square taper beneath the domed head of the bolt, are commonly used to join wood. Shoulder Bolts Shoulder bolts, also known as stripper bolts, have a threaded bolt section that is smaller in diameter than the bolt’s shoulder (the section of the bolt between the head and the beginning of the threaded portion). Shoulder bolts are helpful for a shaft or axle for a rotating part, such as a bearing or a bushing. Socket Head Bolts Socket head bolts have a hollow head and are tightened with an Allen wrench or hex socket tool. Because of the deeper recessed Allen socket head, you can apply more torque to these fasteners without the risk of stripping or damaging the head. Square Head Bolts Squarehead bolts, also known as square bolts, were once widely used before the invention of hex head bolts. Squarehead bolts are available in low, medium, and high strength grades and a square head or a T-slot head. There are fully threaded and partially threaded options available. Steel and stainless steel are the most commonly used materials. Some suppliers refer to these as “screws” as well as “bolts.” The square heads are sometimes fashioned decoratively to resemble the styles common in older construction. Square heads can be pyramid-shaped, hammered, or irregular in appearance, reflecting how these fasteners would have been made using hand-forging techniques before the age of mass production. T-Head Bolts T-bolts are used in securing fuel tanks where access to both sides of the fastener is not always possible. T-head bolts, also known as T-slot bolts, have a head design that allows them to be inserted into a slot or recess, securing the bolt in place and preventing it from turning when the securing nut is tightened. T-head bolts can be fed into a channel in a T-slot track machine and used to secure an object at any point along the channel’s length. U-Bolts U-bolts are fasteners shaped like the letter U with two male threads, one on each end of the bolt, on which a mounting plate bracket and attachment nuts are attached. While most U-bolts have a semi-circular profile, some are squared off. Because they function to clamp an object in place, these fasteners are typically not fully threaded. They are used in various things, from supporting pipes to drive shafts and exhaust systems in automobiles. Some designs include a rubber coating to prevent wear from metal on metal movement. Other U-bolt designs include thick rubber gaskets to reduce vibration and control noise. Non-metallic designs are also available for use when the U-bolt may come into contact with an electrically powered conductor. BeeDeecycle – is amongst the leading U-bolt manufacturers in Ludhiana, a reputable destination for customers worldwide. BeeDee Cycle is a well-known and ISO 9001:2015 certified manufacturer and exporter of anchor bolts and threaded rods. For further information related to U-bolts, contact the leading U-bolt manufacturers in Ludhiana- BeeDeeCycle!